High Temperature Materials and Processing in Power and Aero Gas Turbine  Engines - The Indian Institute of Metals IIM

The Indian Institute of Metals Short Professional Educational Courses(Online) on “High Temperature Materials and Processing in Power and Aero Gas Turbine Engines” (Course Number IIM-25-106) 

Online Mode 12th, 13th & 14th February 2025, 09:30 – 13:30 each day

Background: 

High temperature materials are normally used in harsh environment in power plants and in aero engines. In such demanding industrial environment, high temperature alloys based on titanium alloys, nickel base superalloys and steels are normally used. In addition, thermal barrier coatings such as Platinum Aluminide followed by intermediate layers are very important for protecting the nickel base superalloys from deteriorating fast, while in service. The material processing, its properties, microstructure and testing are very critical for using these materials successfully. The course is designed to introduce these advanced materials and their processing, properties and testing, used for high temperatures that can resist creep, oxidation and thermal fatigue. 

The course addresses all the above aspects. 

Speakers Profile: 

1. Dr Amit Bhattacharjee Retd. Scientist ‘H’, DMRL Hyderabad (Course Convener) 

2. Dr Dipak Kr Das Director, DIE- COE, IIT, Kharagpur 

3. Dr Kulvir Singh Retd. GM, BHEL, Hyderabad 

4. Prof Sujoy K Kar Metallurgy & Materials Engg., IIT, Kharagpur 

5. Dr DVV Satyanarayana Retd. Scientist ‘G’, DMRL, Hyderabad 

6. Dr I Balasundar Scientist ‘G’, DMRL, Hyderabad 

7. Shri Dibyendu Chatterjee Scientist ‘F’, DMRL, Hyderabad 

8. Dr Venkat Scientist ‘F’, DMRL, Hyderabad 

9. Dr Kalyan S Kamal Scientist ‘F’. DMRL, Hyderabad 

10. Dr M Phani Surya Kiran Scientist ‘F’, DMRL, Hyderabad 

11. Dr Rajdeep Sarkar Scientist ‘F’, DMRL, Hyderabad 

12. Dr Vajinder Singh Scientist ‘E’, DMRL, Hyderabad 

The Course Content would be covered in Classroom Lectures accessible through Virtual on-line route from 12th to 14th February 2025. 

Who should attend: The course is useful for practising industrial professionals dealing with power plants, research professionals, academic professionals, students, materials professionals from R&D laboratories, NDT Level I, II Inspectors, Welding Engineers, Government research institutions, NDT services Companies in India etc. Suppliers of materials and power plant equipment manufacturers and R&D centres in public and private sectors may benefit from this course. 

The faculty of the course consists of the following galaxy of experienced professionals   

For Online NDT Level I, II training check details.

Course Content:  

Day-1 

Introduction to power turbine/engine materials - Dr Kulvir Singh  

Introduction to Titanium alloys and near alpha high temperature titanium alloys processing and properties for the compressor section of power turbine/ engine - Dr Amit Bhattacharjee 

Introduction to Gama Titanium aluminides (a) wrought and (b) investment cast processing and properties for turbine section - Prof Sujoy K Kar  

Investment cast nickel base superalloys processing for power/ gas turbine engines Shri Dibyendu Chatterjee

Day-2  

Introduction and processing of ceramics for investment casting of nickel base superalloys Dr Venkat 

Introduction and processing of wrought Ni base super alloys for the power turbine/ engine Dr I Balasundar  

High temperature coatings for Nickel base super alloy components Dr Dipak Kumar Das 

Non-destructive evaluation of Titanium alloys and Nickel base superalloy components for power turbine/ engine Dr M Phani Surya Kiran  

Day-3

Mechanical testing of titanium and nickel base superalloys for power turbine/ engine applications Dr DVV Satyanarayana  

Characterization of high temperature titanium and nickel base alloys for high temperature applications using electron microscopy Dr Rajdeep Sarkar/ Dr Vajinder Singh 

Chemical analysis techniques for titanium and nickel base superalloys Dr Kalyan S Kamal  

Evaluation and Conclusion Dr Amit Bhattacharjee

Registration Fees and Payment Methods  

• Participants may join for the 3 days course module which shall be conducted virtually. 
• Advance payment of Registration fees is mandatory. 
• Participation fee is non-refundable; however, change in nomination is possible. 
• Students may furnish suitable proof of they being students while filling in the online form. 
• 10% discount shall be offered if more than 5 participants are nominated by any Organisation. 

Participants are requested to register via 

https://shorturl.at/sIBrx [For Individuals], 

https://shorturl.at/QFDEz [For Organizations] 

and pay online as per the details given below. 

The online transaction receipt, mentioning the course number IIM 25-106 may be uploaded by using the link provided in google form. Alternately, a demand draft in favour of “The Indian Institute of Metals" payable at Salt Lake, Kolkata can be sent to The Indian Institute of Metals, Metal House, Plot 13/4, Block AQ, Salt Lake, Sec V, Kolkata : 700 091. 

Contact Persons : 

Dr G Balachandran Chairman, 

SPECS Committee, 

The Indian Institute of Metals 

gbalu12@gmail.com / iimshortonlinecourses@gmail.com 

Ms Nabatara Mitra 

The Indian Institute of Metals 

Plot 13/4, Block AQ, Salt Lake, 

Sec V, Kolkata: 700 091 

readingroom@iim-india.net 

Bank Details 

A/c name: The Indian Institute of Metals Bank: 

State Bank of India, SME Branch, Salt Lake, Branch Code: 04289, 

IFSC Code: SBIN0004289 Current A/c No.: 54015600024 

GST: 19AAATT3359D1ZF PAN: AAATT3359D 

Trinity NDT provide complete solutions on NDT & Welder Qualifications. 

Check more details about NDT Testing, Welder Qualification, Ultrasonic testing, magnetic particle testing, Radiography X-ray, Weld inspection, DPT testing services.