Monday, October 30, 2017

Radiographer/RT Technicians job vacancies for TRINITY NDT

Radiographer/RT Technicians job vacancies for TRINITY NDT

Eligibility: Should have 2-4 years experience in RT Testing preferably in Radiography testing                    (Gamma ray/X ray) of castings.

Preference will be for BARC Level I certified candidates

Job Location: Bangalore

Eligible candidates can email resumes to:

Specify post code ‘TNERT1017’ in subject line

Last Date for Applying: 7th November 2017

For more jobs NDT job vacancies for Level I / II visit:

Friday, October 27, 2017

National Skill Competition on Best Welders by IIW India at Chennai, Tamilnadu, India

National Skill Competition on Best Welders by IIW India at Chennai, Tamilnadu, India

(A Member Society of The International Institute of Welding)

Information Booklet for National Skill Competition on Best Welders

A. Best Structural Welder - SMAW Process – 3G Position, Carbon Steel
B. Best Structural Welder - GMAW Process – 3G Position, Carbon Steel
C. Best Pipe Welder - SMAW Process – 6G Position, Carbon Steel
D. Best Pipe Welder - GMAW Process – 6G Position, Carbon Steel
E. Best Pipe Welder - GTAW Process – 6G Position, Carbon Steel
F. Best Pipe Welder - OFW Process – 6G Position, Carbon Steel

The Indian Institute of Welding conducts the “Best Welder” competition every year.
• The preliminaries are conducted at local branches of IIW-INDIA. The winners from branch level competitions are eligible to take part in the final.
• The National Level Competition (Finals) - for the Best Welders (Best Structural Welders and Best Pipe Welders) is held during the National Welding Seminar (or the yearly event) organized by the institute at different venues. this year at Chennai, Tamilnadu, India
• This competition is FREE and open to all members of the institute as well as to the non-members. The desirous candidates are required to contact the respective branches before 21st October 2017.
• Only the best candidate at the branch level in each of the six different categories shall be eligible for the National level competition.
• The candidates selected for the National Level Competition shall be provided with free Boarding and Lodging by the Organisers of the National Welding Seminar (or the yearly event).
• The Best Welders selected at Finals will be given the “IIW–INDIA ELCA Lab Best Welder Award”, inclusive of a Cash prize of ₹ 5000.00 and a certificate for each Category.
• The past winners of the National Level Competitions for the above are not eligible to take part in this competition.

Eligibility for the Best Welders:
1. Must be able to read and write in English and / or in any Indian Language.
2. Must have minimum 3 years’ experience in practical welding of different materials.
3. Must have basic theoretical knowledge of welding of different materials.
4. Must have some knowledge of the Codes / Standards being followed in their work place.
5. Must be within 34 years of age as on 31.12.2017.

General Rules / Procedures
1. To be held across all the branches of IIW- India for Preliminary Round.
2. Branches to propose one person as the responsible contact, for this competition.
3. This year, the International Congress (IC 2017) is scheduled during 7th to 9th December 2017, in Chennai. Therefore, final competition is planned to be conducted during the 1st week of December (2017), at Chennai.
4. The branch level competitions must be conducted within 4th November 2017, so that the names of selected personnel can be sent for the National Level competitions by the 15th November 2017, positively.
5. Carrying out the competition through the branch will be the responsibility of each branch.
6. This will entail, arranging a suitable workshop, material, consumables, safety gear and other essentials as required.
7. This will also entail arranging suitable Assessors for evaluating the candidate's performance.
8. Only two to three days (night) stay is expected at the venue for the competition and declaration of results.
9. The competition can be carried out in two time slots on the same day. Number of machines available should be enough to achieve this objective.
10. Competition will be for two types of Welders, Structural Welder and Pipe Welder.
Structural welder: SMAW & GMAW Processes – 3 G Position, Carbon Steel
Pipe Welder: SMAW, GMAW, GTAW & OFW Processes – 6 G Position, Carbon Steel

The Criteria 1. Only one pre-prepared test coupon (either two pipe pieces or two plate pieces, as applicable, to make one joint) shall be given to each competitor. 2. The welded test coupon should qualify in Visual Testing Inspection and Radiography X ray inspection Tests. 3. Total Marks: 100. (50 marks for Visual assessment and 50 marks for Radiography assessment) 4. In case there is a Tie in marks, completion time will be the factor for winning the competition. i.e., Welder, who have completed earlier, will be the winner.

Specification for Testing Material: 1. Plate: ASTM A36 / IS 2052 / S235 or Equivalent Carbon Steel. 2. Pipe: ASTM A106 Gr. B / API 5L Gr. B / 20# or Equivalent Carbon Steel. Dimension: 1. Plate: 300 mm X 125 mm X 10 mm (2 Pieces) for Structural category A & B (SMAW & GMAW) 2. Pipe: NB 6” Sch. 80 X 125 mm lg. (2 pieces) for Pipe Category C & D (SMAW & GMAW) 3. Pipe: NB 2” Sch. 40 X 125 mm lg. (2 pieces) for Pipe Category E & F (GTAW & OFW) Assembly and Tack Welding: 1. Bevel angle: 60 ~ 65 degree 2. Root gap and root face: As per Welder’s choice 3. Tack welding: Plate shall be tacked in both end of the groove with no more than 15 mm length each. 6” Pipe shall be tacked in 3 positions with no more than 20 mm length each. 2” Pipe shall be tacked in 2 positions with no more than 10 mm length each. Consumables: 1. Category A: E7018 dia 2.5 mm & 3.2 mm 2. Category B: ER70S-6 dia 1.2 mm 3. Category C: E6010 dia 2.5 mm for root and E7018 dia 2.5 mm & 3.2 mm for subsequent passes. 4. Category D: ER70S-6 dia 1.2 mm for root and subsequent passes. 5. Category E: ER70S-6 dia 2 mm for root and dia 2 mm & 2.4 mm for subsequent passes. 6. Category F: ER70S-6 dia 2 mm for root and dia 2 mm & 2.4 mm for subsequent passes. Cleaning:
Grinding is not allowed during and after welding. Hacksaw Blade, file and brush can be used for cleaning.
Completion Time: 1. Category A: 50 min. 2. Category B: 45 min. 3. Category C: 100 min. 4. Category D: 90 min. 5. Category E: 80 min. 6. Category F: 70 min.
1. Visual assessment for all coupons shall be done in accordance with ISO 5817.
2. Radiography testing assessment (only for the visually qualified test coupons) shall be done in accordance with ASME SEC. IX 191.1.2.
3. Final marks will be provided by adding both the marks of visual and radiographic testing assessments.
Note: It is suggested that minimum of 2 assessors each for visual and radiographic testing assessments shall be deputed. Radiography Laboratory may also act as the Third Party Assessor for radiographic testing assessments.

1. Certificate of Participation to be issued to each welder at branch level competition by the respective Branch. Certificates also to be issued to the Winner in each category by the Branch.
2. Certificate of Participation to be issued to each welder at Final Level by the Organising Committee of annual event (IC 2017). Certificates also to be issued to the Winners in each category at Finals by the IIW-India HO during the annual event (IC 2017).

You can contact IIW India Bengaluru Branch

Contact: Ravi Kumar T, Chairman IIW India Bengaluru Branch

Phone: +91 9844129439 Email: or IIW India Chennai Branch or IIW India HO

For more details visit:

Wednesday, October 18, 2017

PAUT technicians for Kingdom of Saudi Arabia - Job vacancies 30nos

PAUT technicians NDT Job Vacancies for recruitment in Saudi Arabia - Job vacancies 30nos 

A reputed NDT Corrosion Control Services Co from Saudi Arabia is recruiting ASNT NDT Level 2 Techs (PAUT/TOFD/ECT) in large numbers now. Any candidates matching with requirements can apply by sending their resumes to
PAUT Level II - Required 30nos to work in kingdom of Saudi Arabia immediately
Job type : Permanent
Salary :70000INR per month

Tuesday, October 17, 2017

Welding Inspector Job Vacancy - Recruitment for Oman

 Welding Inspector Job Vacancy - Recruitment for Oman

We are looking for Welding Inspectors with 6 to 12 years of experience in Oil and Gas Industry.
Position Title

BE / Diploma


Delivery Location

Duration of Assignment
12 Months

No of Openings

Indicative CTC range
1000 – 1200 USD + Local Conveyance + Bachelor Sharing+Food

Professional Qualification/Certification

5+ Years

QAQC, Inspection, WPS, PQR, WPQ, PWHT, Weld consumable control, Weld monitoring, Welder performance measurement, NDT, Multiple welding techniques, Welding machines etc.,
Should be conversant in AWS, ASME Sec V, ASME Sec IX.                          

Should be conversant in PDO,  Shell specifications and International codes etc.,

Prior work experience in PDO projects must and Shell projects is added advantage.
CSWIP 3.1 or AWS-CWI(3 Years Experience after certification) is mandatory

Interested candidates, please send your updated CV to

Specify JOB Code in E-mail Subject Line as 'Applying for JOB Code TP1717'

Last Date for Applying: 23 October 2017.

For more NDT Welding Inspection Jobs follow us at:

To know more about our NABL Accredited NDT Labs, Training & Certification Courses visit:

Thursday, October 5, 2017

Job Vacancies Welders for Singapore Based Company - Interview at Chennai India

Job Vacancies Welders for Singapore Based Company - Interview at Chennai India

A Singapore Based company needs to recruit 8 welders workers specifically for Marine /Plant, Stainless Steel environment.  They must be 
1. proficient in English both written and spoken (as per immigration law). 
2. Preferably from the Nuclear station based as precision work is required based on Australian code of practice for the fabrication and installation of stainless steel process plant and equipment
3. To work in Papua New Guinea / PNG Lae / Ports Moresby to start work Immediate. 
4. Must have valid passport.

The company recruiting will fly in immediate to Chennai  to do the needful interview and process their work permit 
Eligible Welders looking for jobs in Singapore can apply by email to Trinity NDT specifying IN THE SUBJECT OF EMAIL : JOB CODE REF: AMIESP05
Email for mailing your resumes:

Last date for applying: 10th Oct 2017