Job vacancies for Saudi Arabia - Interviews at Mumbai

 1. Heat Treatment Technicians

 2. Plant Inspector

1-1 Shall be graduate engineer in Mechanical/Metallurgical Engineering, API 510, 653, AWS welding inspector certification preferred

1-2 Shall have a minimum of 5 years experience in in-service inspection of Pressure Vessels, Heat Exchangers, Pipelines, and Storage Tanks in Oil & Gas industry.

1-3 Shall have exp. in mechanical design review, project documents review and QA/QC review.

1-4 Knowledge of ASME/API/BS/TEMA codes /standards is essential and Shall be fully conversant with ASME Sections VIII, IX, V; ASME 31.3, 31.4 & 31.8, API 510, 1104, API 650, 653.

1-6 Shall be fully conversant with NDT techniques, Radiographic interpretations.

1-7 Good command of English language, both written and spoken is required.

1-8 Shall be computer literate.

3.   Corrosion Engineer

    2-1 Shall be graduate engineer in Mechanical/Electrical/Metallurgical/Chemical engineering.

2-2 NACE CP Level 2 (CP Technician) certification or equivalent preferred.

2-3 Shall have a minimum of 5 years experience in operation, maintenance and testing of CP systems for underground piping, storage tanks, wells in the Oil & Gas industry.

2-4 Shall have experience in design of CP systems.

2-5 Knowledge of CP relevant codes and standards including NACE RP0104, NACE RP0169, NACE RP0176, NACE RP0177, NACE RP0186, NACE
RP0193, NACE RP0196, NACE RP0285, NACE RP0388, NACE RP0572, NACE RP0572, NACE TM497, API RP651, ASTM G57, BS EN 7361, BS EN
13173, DNV RP-B401, ISO 15589 and other relevant codes.

2-6 Understand the full range of equipment and techniques and their proper application to survey, inspect and test the CP Systems.

2-7 Supervising all field activities including Surveys, maintenance and upgrading, extending of the existing CP Systems and installation of new CP Systems.

2-8 Good command of English language, both written and spoken is required.

2-9 Shall be computer literate.

4.   Electrical / Instrumentation Inspector 

    3-1 Shall be graduate engineer in Electrical Engineering.

3-2 Shall have a minimum of 5 years experience in in-service inspection of electrical equipment such as Switchgear, Power Generation equipment in Oil & Gas industry.

3-3 Shall have exp. in electrical design review, project documents review and QA/QC review.

3-4 Experience in inspection during construction of power distribution systems, plants' machinery, generators, switchgears, control panels & equipment and associated ancillaries and off site.

3-5 Ability to carry out megger, ducter and hi-pot tests on electrical equipment and cables, monitor motor test runs and record results and carry out fault finding diagnostics on control panels, etc.

3-6. Knowledge of NEMA, NFPA, 1EC, IEEE & ANSI codes / standards is essential and shall be fully conversant with ISO-9001 Quality Management System.

3-7 Good command of English language, both written and spoken is required.

3-8 Shall be computer literate.

4.   Civil / Refractory Inspector

4-1 Shall be graduate engineer in Civil Engineering of Geotechnical Engineering background.

4-2 Shall have a minimum of 5 years experience in design assessment and in-service assessment of foundation and concrete works in the oil & gas industry.
4-3 Shall have exp. in civil design review, project documents review and QA/QC review.

4-4 Knowledge of ACI, AWS, AISC, ASTM, AASHO codes / standards is essential and shall be fully conversant with ISO-9001 Quality Management System.

4-5 Good command of English language, both written and spoken is required.

4-6 Shall be computer literate.

5. Sales Executive – Non-destructive testing (NDT) Equipments & related services experience in NDT companies in India or abroad  

Candidates meeting the above requirement can send us their resumes through email to : trinityndt@yahoo.co.in. Client interview will be held at Mumbai on 03 rd December 2011.  

Visit: www.trinityndt.com for more about the current job openings.