Electromagnetic - Eddy Current testing Level II training & certification courses starts on 04th October 2013 at Trinity NDT, India
 |
| Trinity NDT Eddy Current Inspection/testing Facility and Equipment |
 |
| Eddy Current training Schedule at Trinity NDT Bangalore India |
NDT allows parts and materials to be inspected and measured
without damaging them. Because it allows inspection without interfering with a
product's final use, NDT provides an excellent balance between quality control
and cost-effectiveness.
Introduction to Eddy Current testing
Eddycurrent inspection is one of several NDT methods that use the principal of
“electromagnetism” as the basis for conducting examinations. Eddy currents are
created through a process called electromagnetic induction. When alternating
current is applied to the conductor, such as copper wire, a magnetic field
develops in and around the conductor. If another electrical
conductor is brought into the close proximity to this changing magnetic field,
current will be induced in this second conductor
Eddy Current testing
Applications
·
Crack
detection
·
Material
thickness measurements
·
Coating
thickness measurements
·
Conductivity
measurements
Training course objectives
1.
Describe the basic principles of the
eddy current test method
2.
List several applications of the
eddy current test method
3.
List the types of discontinuities
detected with the eddy current test method
4.
Describe the cause and effect of
various types of discontinuities
5.
Describe the operational steps in
the eddy current test and understand the importance of each step following a
written procedure
6.
Interpret and evaluate the test
results with respect to the applicable standards
7.
Complete the required test reports,
and prepare a clear and concise written instruction (Procedure)
8.
Locate defects in various materials,
components and structures with a high probability of detection
Level II Course Outline
Electromagnetic Testing
1.
Fundamentals
2.
Electromagnetic field generation
3.
Properties of eddy current
4.
Effects of varying frequency
5.
Phase discrimination
6.
Sensors Electromagnetic testing
7.
Basic types of equipment; types of
read out
8.
Reference standards
9.
Applications and test result
interpretation
10.
Flaw detection
11.
Conductivity and permeability
sorting
12.
Thickness gauging
13.
Process control
ET Level II Practical Training
Setting
up the Instrument, Selection of Frequencies for Tube Inspection, Selection of
Probe Size, Calibrations, Depth Curve, Data Acquisition, Test on Various
Samples, Prepare test report
ET Training Brochure: Download
For more details contact us on +91 98441 29439 / 9141 339994 / 99009 29439 Email: training@trinityndt.com
For
Comments
Post a Comment
Ask, Comment, Suggest to Ravi at Trinity NDT's Blog