NDT Level II Training in Bangalore: Our November 2026 Batch Wraps Up at Peenya
NDT Level II Training in Bangalore: Our November 2026 Batch Wraps Up at Peenya
By Ravi Kumar T, CEO and Co-Founder, Trinity NDT WeldSolutions Pvt. Ltd.
There is a particular kind of quiet that settles over a training room in the last hour of the last day. Specimens are packed away, notes are being compared, and someone is always asking the instructor one more question about an indication they were not sure how to interpret. We heard that quiet again this month, when our November 2026 NDT Level II training batch finished at our centre in Peenya, Bengaluru.
This batch was fully offline, and we want to tell you why that still matters, what the group worked on, and how you can join the next one.
Why we still believe in offline NDT training
Non-destructive testing is a hands-on craft. You can learn the theory of ultrasonic testing from a screen, but you cannot learn the feel of a good probe coupling, or the judgement needed to tell a geometric echo from a real flaw, without a probe in your hand and a real specimen under it.
That is why we run our Level II programmes in person. In Peenya, trainees work on actual equipment, on specimens with real discontinuities, and under the eye of instructors who have spent years doing this work on the shop floor and in the lab, not just teaching it. Mistakes made in the training room cost nothing. Mistakes made on a pressure vessel or an aircraft component can cost a great deal.
What our November 2026 batch covered
The batch trained in e.g. Ultrasonic Testing, Radiographic Testing, Magnetic Particle Testing, Liquid Penetrant Testing, Visual testing and Eddy Current testing at Level II. In plain terms, a Level II professional is expected to do much more than follow instructions. By the end of the programme, trainees were practising how to:
- Set up and calibrate the equipment for the method being used
- Carry out inspections according to written procedures and applicable codes and standards
- Interpret and evaluate indications against acceptance criteria
- Record findings clearly and prepare inspection reports
- Guide and supervise Level I personnel on the job
Every method block combined classroom theory with practical sessions, followed by examinations: general, specific and practical, as applicable to your scheme. The practical component is where most of the learning happens, and it is the part the trainees tell us they value most.
Learning inside a working, accredited laboratory
Our training centre is part of Trinity NDT WeldSolutions, a NABL ISO/IEC 17025:2017 and NADCAP Aerospace Merit accredited NDT laboratory that has been operating in Peenya since 2001. That has a practical benefit for trainees: they learn in an environment where documented procedures, calibration, traceability and quality discipline are part of everyday work, not just a lecture slide.
Over the years we have supported more than 1,500 corporate clients across 45+ countries and trained over 18,000 NDT professionals. Many of them now work in aerospace, oil and gas, power, railways, fabrication and manufacturing, and we are glad to see the same names turn up in inspection reports around the world.
A note on certification
People often ask us which certification scheme their Level II training leads to. The honest answer is that it depends on your employer's written practice and the industry you work in. Our Level II programmes are delivered in line with ASNT SNT-TC-1A requirements, and we can guide you on aerospace requirements such as NAS 410 where relevant. If you are not sure which route suits you, speak to our team before enrolling. A five-minute conversation can save you months. Call now or WhatsApp: +91 9844129439
Who should join an NDT Level II course?
Our Level II batches usually include a mix of people, and that mix is part of what makes them good:
- Level I technicians who want to move up and take on interpretation and reporting responsibility
- Diploma and engineering graduates (mechanical, metallurgy, production and similar) starting a career in quality and inspection
- Welding and fabrication professionals who want a deeper understanding of weld quality and defects
- Quality engineers and inspectors from manufacturing companies who need formal qualification in specific NDT methods
If you meet the eligibility requirements for the method you are interested in (education and prior experience or training hours), you are welcome to apply.
What our trainees take away
Every batch is different, but a few things come up again and again when we ask for feedback. Trainees tell us they appreciate the amount of equipment time, the patience of the instructors with repeated practice, and the realistic specimens. Several have told us that the interview or the first week at a new job felt easier because they had already done the work with their own hands.
To every member of the November 2026 batch: congratulations, and thank you for the effort you put in. We look forward to hearing about your first inspections.
Join our next NDT Level II batch in Bangalore
The next batch begins on 16th December 2026. Seats are limited so that every trainee gets proper time on the equipment.
- Location: Trinity NDT WeldSolutions, Peenya Industrial Area, Bengaluru
- Mode: Offline, classroom and hands-on practical
- Methods: UT, MT, PT, RTFI, VT, ET and Welding Inspection
- Duration: 20 days for NDT Level II 6 courses + 3 days for Welding Inspection
- To enquire: call +91 9844129439 / +91 9141339994, email: training@trinityndt.com, or fill in the enquiry form on our NDT training page
You can also read about our other programmes, including PAUT and TOFD training and welder qualification and training.
Frequently Asked Questions
What is NDT Level II?
NDT Level II is the qualification level for personnel who can set up and calibrate equipment, perform inspections to procedure, interpret and evaluate results against codes and standards, and report findings. Level II personnel can also supervise Level I technicians.
Where can I do NDT Level II training in Bangalore?
Trinity NDT WeldSolutions offers offline NDT Level II training at its centre in Peenya Industrial Area, Bengaluru, inside a NABL and NADCAP accredited NDT laboratory.
Is the training online or offline?
Our Level II programmes are conducted offline at our Peenya centre, because practical equipment handling is central to the course.
Which NDT methods can I train in at Level II?
Our Level II offering covers UT, RT, MT, PT, VT, ET and other advanced NDT methods: PAUT, TOFD and CR. Please check the training page or contact us for the current schedule.
What are the eligibility requirements?
Eligibility depends on the method and the certification scheme, and usually involves education and prior training or experience. Check our NDT Level II training eligibility information. Contact our team and we will tell you exactly what applies to you.
How long does the NDT Level II course take?
Duration depends on the method and your prior training. Ultrasonic Testing course - 5 days, Magnetic Particle testing course - 2 days, Liquid penetrant testing course - 2 days, Radiography Film Interpretation training - 3 days, Visual testing course - 3 days, Welding Inspection - 3 days and Eddy Current testing training - 5 days. Total - 20 Days for NDT Level II and 3 days for Welding Inspector course.
Will I get a certificate?
Trainees receive training as per ASNT SNT TC 1A written practice approved by ASNT Level III, subject to passing the required examinations. Certification is also governed by your employer's written practice and the scheme followed.
Do you help with job placement?
We share openings from industry contacts with our trainees, though we cannot guarantee placement. Check our NDT, Welding Job openings page for more details about vacancies.

Comments
Post a Comment
Ask, Comment, Suggest to Ravi at Trinity NDT's Blog