Posts

Showing posts from September, 2022

Failure analysis of Weld Joints- Case studies, A Technical Talk

Image
 Failure analysis of Weld Joints- Case studies, A Technical Talk Technical talk fro IIW India is scheduled at 1600 hrs on Saturday 10th September 2022 at IIW Bengaluru Branch, Trinity NDT Aspire, Peenya, Bengaluru. Title of my talk is-: Failure analysis of Weld Joints- Case studies   Outline of the talk: The talk will primarily focus on defect investigation of weld failures in aeronautical components . Systematic metallurgical analysis carried out to arrive at the cause of weld failure will be exemplified through number of case studies. Recommendations provided in many of the failure cases will also be covered during the talk.  Entry: Free About Speaker Vaisakhi Nandi obtained her B.E. in Metallurgy from M.S. University, Baroda and M.Tech in Materials Science from IIT Bombay. She joined Hindustan Aeronautics Limited (HAL) in October 2002 and since then she is working in Central Materials and Processes Laboratory (CMPL) of Foundry & Forge (F&F) Division of HAL, Banga

3DExperience Design Course in Bangalore India by Karnataka Aerospace Technology Centre

Image
  3DExperience Design Course in Bangalore India by Karnataka Aerospace Technology Centre   Karnataka Aerospace Technology Centre (A Govt. of Karnataka Organisation) 2nd floor, DIC Bengaluru (Urban) Building, Rajaji Nagar Indl. Estate, West of Chord Road,  Bengaluru – 560 010 in association with K-tech Centre of Excellence in Aerospace and Defence (A Govt. of Karnataka Organisation) offer Courses for ITI / Diploma / Engineering Graduates & Working Professionals 3DExperience DESIGN Course  Duration: 40 hrs Course date: 19th to 23rd September, 2022 Course timings: 09:30 am to 05:30 pm Venue: VTU Regional Office, Annapoorneshwarinagar, Nagarbhavi, Bengaluru - 560091 Certificate will be awarded on completion of the aerospace course Course fee: Rs. 5,000/- per person +18% GST (Course fee includes Lunch, Coffee / Tea) Topics Covered 1) Introduction to 3DExperience - 2hrs 2) Sketcher - 4hrs 3) Part design - 7hrs 4) Assembly design - 10hrs 5) Drafting - 8hrs 6) Generative surface design