AWS Lecture series-VII Chennai India on the topic “Structural Steel Fabrication & Welding “
 |
| AWS Lecture series-VII Chennai India on the topic “structural steel fabrication & welding “ |
Speaker : Robert E Shaw Jr,
Chairman, IIW Commission XV on design, analysis and fabrication of Structral
Steels. AWS D1.1 and AWS D1.8
Venue:
Pallava, Cosmopolitain Club, Anna Salai, Chennai 600 002.
Date: Saturday, 06.12.2014
For More information contact Mr V. Muralidharan, Mobile: +91 9962456967 email: ennappan@gmail.com
The same AWS Lecture programs are also organized in Baroda, Pune, Trichy, Chennai, Cochin - Kerala, Kolkata - West Bengal State, Delhi - NCR and Bhilai - Chhattisgarh in India.
Date: Saturday, 06.12.2014
ABOUT THE SPEAKER:
Robert E Shaw Jr
Robert E Shaw Jr
is president of the steel structures technology centre Inc, a consulting
firm in the USA providing consulting
services, technical resources & training related to the design,
fabrication, erection, Inspection and
quality of steel framed structures.
Bob is a member of the American
Welding Society (AWS) D1 Structural welding committee, including subcommittees
responsible for AWS D1.1 Structural Welding Code-Steel and the AWS D1.8 Seismic
supplement.
He chairs the International Institute
of welding (IIW)Commission XV on Design, Analysis and Fabrication of Welded
Structures and the sub commission XV-C on Fabrication. Bob serves on the
American Institute of Steel Construction (AISC) Specifications Committee,
including TC13 on Quality Assurance, TC6 on Connections, TC9 on Seismic Design,
as well as AISC Connections Prequalification Review Panel.
He is a member of the Specifications
Committee of the Research Council on Structural Connections (RCSC), responsible
for the Specification for Structural Joints using the High Strength Bolts. Bob
has presented lectures and seminars on welding and steel construction in Japan,
China, India, Australia, New Zealand, Ecuador, Nigeria, Canada and the USA.
He is the author of the popular steel
construction references “Structural Welding Quality Handbook” and the
“Structural Bolting Handbook”, as well as many technical papers. With 39 years
of experience in steel construction and active for the past 20 years in the
development of standards used for steel construction, he is a popular speaker
known for his practical insights and applications for the industry.
Course contents:
One
day lecture is focused on the welding & design of welded joints for steel
structures using latest editions of AWS
D1.1 structural welding code, including use of is 800.
Introduction to Welding
& Design
Welding
process and filler metals
Engineering
decisions and responsibilities
Welding
nomenclature nomenclature
Economical Design and
Constructability
Design
using prequalified status
Steels
and filler metals
Prequalified
joint design
Welding
procedures
Design Values
Weld
size, throat, and length skewed joints
Permitted
increases and required reductions
Welding details
Minimum
and maximum weld sizes
Weld
terminations, eccentricity
Qualification
Requirements
Welding
personnel
Non-prequalified
steels, joints and process
Fabrication Requirements
Weld
tabs and weld backing
Weld
access holes
Inspection
Inspectors
and nondestructive testing technicians
Inspection
tasks
Fatigue Design for
Structures
Machinery
and bridges
Welded
joint details
Maximum
stresses and stress ranges
Seismic Welding
Governing
standards, demand critical welds
Designs
drawing and specifications
For More information contact Mr V. Muralidharan, Mobile: +91 9962456967 email: ennappan@gmail.com
The same AWS Lecture programs are also organized in Baroda, Pune, Trichy, Chennai, Cochin - Kerala, Kolkata - West Bengal State, Delhi - NCR and Bhilai - Chhattisgarh in India.
Comments
Post a Comment
Ask, Comment, Suggest to Ravi at Trinity NDT's Blog